Description
The two sensing electrodes are pushed firmly into the wood or building material where they measure the moisture content as a percentage based on the dry mass (dry weight).
The hold function freezes the last measurement while the backlit display ensures that the meter can be used in all lighting conditions. A slip-on protective cap and belt holder ensures the safe storage of the moisture meter and a hand strap helps prevent the meter from accidentally being dropped.
Practical –the characteristic curves in the testo 606-1 moisture meter
The testo 606-1 comes with a wide range of characteristic curves for wood and building materials. This allows the measured moisture content to be shown directly as a weight percentage.
Characteristic curves for precise wood moisture measurements:
• Beech
• Spruce
• Larch
• Oak
• Pine
• Maple
Characteristic curves for precise building material measurements:
• Cement screed
• Concrete
• Plaster
• Anhydrite screed
• Cement mortar
• Lime mortar
• Bricks
Delivery Scope
testo 606-1 moisture meter, protective cap, belt holder, calibration protocol, batteries.
Technical data
Wood / Building material moisture
Measuring range |
0.0 to 11.0 % by weight; anhydrite screed
7.0 to 47.9 % by weight; oak, pine, maple, ash-tree, douglas fir, meranti
8.8 to 54.8 % by weight; beech, spruce, larch, birch, cherry, walnut
0.6 to 9.9 % by weight; lime mortar, plaster
0.9 to 22.1 % by weight; cement screed, concrete
0.7 to 8.6 % by weight; cement mortar
0.1 to 16.5 % by weight; bricks
|
---|---|
Material |
0.1
±1 %
1 s
|
General technical data
Dimensions |
119 x 46 x 25 mm (incl. protective cap)
|
---|---|
Operating temperature |
-10 to +50 °C
|
Protection class |
IP20
|
Battery type |
2 AAA micro batteries
|
Battery life |
200 h (average, without display illumination)
|
Storage temperature |
-40 to +70 °C
|
Weight |
90 g (protective cap and batteries included)
|
Reviews
There are no reviews yet.